BendARC / CrownARC Systems

Watch BendARC & CrownARC Bending Tools in Action!

 

Thanks to Eric & Devlin at Custom Canvas Alaska LLC, Fairbanks, Alaska for the great video!

Bendarc Quick-Switch Sizes & Prices

  • 7/8” or 1” round (22mm or 25mm)
    Bendarc 06” radius $612
    Bendarc 08” radius $675
    Bendarc 10” radius $711
    Bendarc 12” radius $810
    Note: Add $48 to equip with HD arm
  • 1 1/4” round (32mm)
    Steel plated form blocks/HD bend arm
    Bendarc 10” radius $927
    Bendarc 12” radius $1066
  • 1” or 1 1/4″ square (25mm or 32mm)
    Steel plated form blocks
    Bendarc 10” radius $927 (1″ only)
    Bendarc 12” radius $1026 (1″)
    Bendarc 12” radius HD arm $1066 (1 1/4″)

Note: Square and 1¼” round models have the forming block encased in steel plate for extra strength and long life. 1¼” round and 1 ¼” square have a longer, stronger, super-duty bend arm. (HD arms are available for more leverage on other sizes)
Square Bendarcs use an inverted V (^) for strong, precise bends. The 12”, 1” square Bendarc is a lightning fast way to bend awning ribs including 1″ square and slotted “staple-in” tubing.

Bendarc Quick-Switch professional benders have interchangeable dies for tube size and radius. The following parts allow you to change tube and radius sizes.

Forming Blocks Sizes & Prices

  • 7/8” or 1” round (22mm or 25mm)
    Bendarc 06” radius $285
    Bendarc 08” radius $348
    Bendarc 10” radius $384
    Bendarc 12” radius $483
  • 1 1/4” round (32mm)
    Bendarc 10” steel plated only $600
    Bendarc 12” steel plated only $739
  • 1” or 1 1/4″ square (25mm or 32mm)
    Bendarc 10” radius $600 (1″ only)
    Bendarc 12” radius $739 (1″ or 1 1/4″)


Bendarc Roller Sizes & Prices

  • 7/8” or 1” round (22mm or 25mm) $60
  • 1 1/4” round (32mm) $63
  • 1” or 1 1/4″ square (25mm or 32mm) $63


Clamp Block Assembly Sizes & Prices

  • 7/8” or 1” round (22mm or 25mm) $48.00
  • 1 1/4” round (32mm) $54.00
  • 1” or 1 1/4″ square (25mm or 32mm) $48.00 (1″ or 1 1/4″)


Bend Arm
– $198
HD Bend Arm – $246
Plastic Calculating Scale – $12
Bend-A-Bow On-Line Computing Software Access – $96
Bend-A-Bow Stainless 14″ swing-arm Digital Angle Finder – $31
Bend-A-Bow Digital Angle Cube – precise Vertical measurement – $36

  • When ordering a forming block in a different tube size for your Bendarc Quick-Switch, you will also need a clamp block and roller in that size.
  • Older Bendarcs will NOT accept Quick-Switch parts.
  • Quick-Switch models have square steel pull-down arms with 3 or 4 positions for the roller. Older 3 position arms cannot use 12” radius. A 10% discount applies to additional Q-S parts ordered with a Bendarc.
  • Bendarc Rollers have high-strength steel, sleeve bearings for long life.


Crownarc Sizes & Prices

Crownarc 3 roller crank driven crowner

  • 7/8” or 1” round (22mm or 25mm) $543
  • 1 1/4” round (32mm) $603 /w extra large gears
  • 1” square (25mm) $549
  • 1 1/4″ square (32mm) $630/w extra large gear
  • 1” (25mm) Std. Crownarc rolls 3/4”, 7/8” plus 1” round tubing
  • Crownarc for 11/4” (32mm) round tubing also rolls 1” and 7/8” round tubes.
  • Crownarcs for round tube roll any round size smaller than the stated size.


Center Roller /w Bearing

  • 7/8” or 1” round (22mm or 25mm) $63
  • 1 1/4” round (32mm) $66
  • 1” square (25mm) $66
  • 1 1/4″ square (32mm) $72


Outer Roller, NOT Mounted

  • 1” round (25mm) $63
  • 1 1/4” round (32mm) $66
  • 1” (25mm) $66
  • 1/4″ square (32mm) $72


Outer Roller, Gear Mounted

  • 7/8” or 1” round (22mm or 25mm) $93
  • 1 1/4” round (32mm) $129 extra large gear
  • 1” square $96
  • 1 1/4″ square (32mm) $135 extra-large gear


Slide Block Assembly, 3-piece
– $41 (New style-minimizes wobble)
Offset Crank Arm – $30 (double-bent, drilled)
Hand Grip – $21 (New style-polished, heavy duty)
Back Plate /w Weld Nut – $192
Rollers – see above
Bend-A-Bow On-Line Computing Software Access – $96

*Bend-A-Bow is available indefinitely so long as ARC maintains a website. It may not be shared with other users. You must supply an email address so we can notify you of periodic changes in the password.

Older Crownarcs will accept square rollers if they have ¾” roller shafts, approx. 83/8” on center between the lower rollers and 11/4″ round rollers with large gears if there are 2 extra roller mount holes visible from the rear of the Crownarc (If not, 4 needed extra holes can be drilled).

This price list, dated March 2022 supersedes all previous prices. Specifications and prices are subject to change.