BendARC / CrownARC Systems

Watch BendARC & CrownARC Bending Tools in Action!

 

 

 

 

Thanks to Eric & Devlin at Custom Canvas Alaska LLC, Fairbanks, Alaska for the great video!

BendarcQuickSwitchSmall

Bendarc

combination2

Crownarc

BendarcFormingBlockSmall

Forming Block

Bendarc Quick-Switch Sizes & Prices

  • 7/8” and 1” round (22mm or 25mm) 
    Bendarc 06” radius $465
    Bendarc 08” radius $525
    Bendarc 10” radius $591
    Bendarc 12” radius $720
  • 1 1/4” round (32mm)  
    Bendarc 10” radius $816
    Bendarc 12” radius $948
  • 1” or 1 1/4″ square (25mm or 32mm)  
    Bendarc 10” radius $795 (1″ only)
    Bendarc 12” radius $930 (1″ or 1 1/4″)

Note: Square and 1¼” round models have the forming block encased in steel plate for extra strength and long life. 1¼” round has a longer, stronger, super-duty bend arm.  (HD arms are available for more leverage on other sizes)
Square Bendarcs use an inverted V (^) for strong, precise bends. The 12”, 1” square Bendarc is a lightning fast way to bend awning ribs including 1″ square and slotted “staple-in” tubing.

Bendarc Quick-Switch professional benders have interchangeable dies for tube size and radius. The following parts allow you to change tube and radius sizes.

Forming Blocks Sizes & Prices

  • 7/8” and 1” round (22mm or 25mm) 
    Bendarc 06” radius $150
    Bendarc 08” radius $222
    Bendarc 10” radius $291
    Bendarc 12” radius $489
  • 1 1/4” round (32mm) 
    Bendarc 10” radius $723 – 6 pc kit
    Bendarc 12” radius $780 – 6 pc kit
  • 1” or 1 1/4″ square (25mm or 32mm)  
    Bendarc 10” radius $453 (1″ only)
    Bendarc 12” radius $660 (1″ or 1 1/4″)


Bendarc Roller Sizes & Prices 

  • 7/8” and 1” round (22mm or 25mm) 
    $51
  • 1 1/4” round (32mm) 
    $57
  • 1” or 1 1/4″ square (25mm or 32mm) 
    $57 (1″ or 1 1/4″)


Clamp Block Assembly Sizes & Prices

  • 7/8” and 1” round (22mm or 25mm)
    $42.00
  • 1 1/4” round (32mm) 
    $51.00
  • 1” or 1 1/4″ square (25mm or 32mm) 
    $42.00 (1″ or 1 1/4″)


Bend Arm
$162
HD Bend Arm$183
Plastic Calculating Scale with instructions – $21
Bendarc Back-Plate, mount arms, with weld-nuts – $249
Bend-A-Bow On-Line Accounting Software Access – $60
Bend-A-Bow 14″ Digital Angle Finder – $25

  • When ordering a forming block in a different tube size for your Bendarc Quick-Switch, you will also need a clamp block and roller in that size.
  • Older Bendarcs will NOT accept Quick-Switch parts.
  • Quick-Switch models have square steel pull-down arms with 3 or 4 positions for the roller. Older 3 position arms cannot use 12” radius. A 10% discount applies to additional Q-S parts ordered with a Bendarc.
  • Bendarc Rollers have high-strength steel, sleeve bearings for long life.


Crownarc Sizes & Prices

Crownarc 3 roller crank driven crowner

  • 7/8” and 1” round (22mm or 25mm)
    $426
  • 1 1/4” round (32mm) 
    $528 /w extra large gears
  • 1” or 1 1/4″ square (25mm or 32mm)
    $468
  • 1” (25mm) Std. Crownarc rolls 3/4”,  7/8” plus 1” round tubing
  • Crownarc for 11/4” (32mm) round tubing also rolls 1” and 7/8” round tubes.
  • Crownarcs for round tube roll any round size smaller than the stated size.

 

Center Roller /w Bearing

  • 7/8” and 1” round (22mm or 25mm)
    $54
  • 1 1/4” round (32mm) 
    $63
  • 1” or 1 1/4″ square (25mm or 32mm) 
    $63


Outer Roller, NOT Mounted

  • 7/8” and 1” round (22mm or 25mm)
    $54
  • 1 1/4” round (32mm) 
    $63
  • 1” or 1 1/4″ square (25mm or 32mm) 
    $63


Outer Roller, Gear Mounted

  • 7/8” and 1” round (22mm or 25mm)
    $78
  • 1 1/4” round (32mm) 
    $108 extra large gear
  • 1” or 1 1/4″ square (25mm or 32mm) 
    $87


Slide Block Assembly, 3-piece 
$39 (New style-minimizes wobble)
Hand Grip
 – $24 (New style-polished, heavy duty)
Crank Arm – $42 (double-bent, drilled)
Back Plate /w Weld Nut – $165

Older Crownarcs will accept square rollers if they have ¾” roller shafts, approx. 83/8” on center between the lower rollers and 11/4″ round rollers with large gears if there are 2 extra roller mount holes visible from the rear of the Crownarc (If not, 4 needed extra holes can be drilled). This price list, dated January 2014 supersedes all previous prices. Specifications and prices are subject to change.